Graypor
Especially when it comes to the renovation of old buildings, where the height available for structuring the floor is usually limited. Impact-sound insulating panels made of Graypor having an enhanced thermal insulation capability, in comparison to Styropor, offer improved insulation against heat as well as impact-sound muffling.
Leveling layers for pipes
As a matter of principle, leveling layers are necessary whenever pipes are to be laid on the exposed floor. Here, it should be noted that the leveling layer must extend beyond the fasteners of the pipes. Panels made of Graypor can be used to make leveling layers in an environmentally sound manner, especially since the light-weight panels made of Graypor also offer excellent thermal insulation. This is especially advantageous in the case of screed adjacent to unheated rooms.
Impact-sound insulating panels made of Graypor are suitable for applications involving traffic loads of up to 5 kPa.
Styroq Graypor and XPS (Extruded Polystyrene) are used for Insulation. Let’s have a comparison between STYROQ Graypor and XPS (Extruded Polystyrene) and find out the best Insulation Material available.
STYROQ Graypor (EPS) | XPS (Extruded Polystyrene) |
STYROQ Graypor can be supplied up to from 5-1350mm | XPS can be made from 25-100 mm |
Any length up to 6 meters or width up to 1.35 meters is possible | ONLY fix length and width is possible i.e 1250 x 600 mm |
STYROQ Graypor can be made from 14 to 35 kg/M3density | 30 kg/M3 is the lowest density in case of XPS |
Thermal conductivity (K value) @ 20.9 Kg/M3 : 0.0322 WmK | Thermal conductivity K value @30 Kg/M3 : 0.032 Wmk |
STYROQ Graypor is Compatible with Concrete & Brick works | Smooth skin does allow concrete mortar to stick in |
R-value drift: No change in R-value till the life of the Insulation | R-value drift: R-value deteriorate with the age of insulation |
Since natural air is as insulating media | Since injected gas is as insulating media |
STYROQ Graypor is flexible board , therefore, NO crack formation | Since XPS is rigid board there will crack formation |
Due to expansion or contraction of building Especially with EIFS / ETICS | Due to expansion or contraction of building Especially with EIFS / ETICS |
Compressive property 150 kpa ( at 30 Kg/m3) | Compressive property 210 kpa ( at 30 Kg/m3) |
Environment IMPACT | Environment IMPACT |
STYROQ Graypor is CFC , HCFC free | ONLY CFC free NOT HCFC free |
Ozone Depletion Potential ODP <0 | ODP <0 |
Global Warming Potential GWP is : 0 | Global Warming Potential GWP is : 1300 |